|
BIOSCOR SCALP PEEL AND IN-HOUSE TREATMENT AT HOME
In order to keep your hair follicles free of thick sebum which can prevent healthy hair growth, we
recommend the Bioscor Scalp Peel and in-house treatment at regular intervals as suggested by
your consultant. This is available to you as a home kit for your convenience.
Step 1:
Wash hair with AO Shampoo, rinse off and dry thoroughly with a hairdryer or with a towel if a hairdryer is not available.
Step 2:
Squeeze out contents of Bioscor Scalp Peel (Vial A) on to the balding area including temples. Massage well into scalp.
Wash hands thoroughly after you have massaged the scalp. If it is not removed properly, this may cause the skin on the hand to peel.
You will experience a burning sensation over the scalp. Try to leave it on the scalp for approximately 3 to 8 minutes.
If possible, look at the scalp in the mirror and check if scalp is too red or too irritated.
Provided your scalp can tolerate it you should leave it on for an average of 6 to 8 minutes for best results.
When you have achieved the effect of the "peel", wash scalp thoroughly under a shower.
Apply AO Rinse and wash off. Then dry hair and scalp.
Step 3:
Provided scalp is not too irritated, apply Bioscor Lotion 1 (Vial B) over balding area. Allow to dry.
Step 4:
Apply contents of Bioscor Lotion 2 (Vial C) over affected area. Allow to dry.
Step 5:
Apply Bioscor Forte Lotion (Vial D).
In order to ensure that you can perform this procedure safely at home, we recommend that you
experience the first treatment at the Bioscor clinic.
DO NOT LEAVE THE SCALP PEEL WHICH IS VIAL A ON THE SCALP LONGER THAN NECESSARY IN ORDER TO AVOID SUPERFICIAL BURNS TO THE SCALP. CONTACT BIOSCOR CONSULTANTS FOR ADVICE, IF NECESSARY.
NB. If scalp is too irritated after applying Bioscor scalp peel, apply Vial B, C, and D on another day.
Should you have any problems please do not hesitate to contact our office as most
problems can be easily overcome. Click here to contact us.
|
